光計測用光学機器と光計測システムのシナジーオプトシステムズ

LED COAXIAL EPI-ILLUMINATION UNIT FOR VISIBLE WAVELENGTH RANGE LS-EL001

This is LED coaxial epi-illumination unit mainly for visible wavelength range.

In combination with Synos' CCD detector and optical measurement optics M-Scope series with coaxial epi-illumination port, it is possible to observe microscopic image of object, such as edge image of optical fiber, optical waveguide module, and so on.

There are monochromatic light type (465nm、520nm、645nm、850nm, etc.) and white light type, and possible to select unit as measurement wavelength.

UNIT SELECTION (TYPICAL)

It is possible to restrain influence of chromatic aberration of optics and objective lens between microscopic image by coaxial epi-illumination and measurement light image, as selecting near wavelength of epi-illumination as measurement wavelength.

Item No. Item Outer diameter of light guide Component / specification
LS-EL001/650 LED Coaxial epi-illumination 8mmφ Monochromatic light type
Peak wavelength : 645nm
LS-EL001/850 LED Coaxial epi-illumination 8mmφ Monochromatic light type
Peak wavelength : 850nm
LS-EL001/W LED Coaxial epi-illumination 8mmφ White light type
Relative color temperature:5300K

*Another selection : Blue(Monochromatic light type / Peak wavelength : 465nm), Green(Monochromatic light type / Peak wavelength : 520nm), etc.

ADAPTATION OF OPTICS

  • Synos' optical measurement optics M-Scope series with coaxial epi-illumination port
    • Sophisticated Optical Measurement Optics M-Scope type I
    • Simplified Optical Measurement Optics M-Scope type J
    • Sophisticated Optical Beam NFP Measurement Optics M-Scope type S
    • NFP/FFP Simultaneous Measurement Optics M-Scope type D

ADAPTATION OF IMAGE SENSOR

  • High Resolution Digital CCD Detector ISA011
  • CMOS Camera (for image observation) ISA003-01
  • Other CCD/CMOS type detector for image observation in visible range

MANUFACTURER

  • CCS Inc., Japan.

NIR HALOGEN COAXIAL EPI-ILLUMINATION UNIT LS-EH001/IR

This is a illumination unit for NIR image sensor.

In combination with InGaAs NIR detector and optical measurement optics M-Scope series with coaxial epi-illumination port, it is possible to observe microscopic image of object, such as edge image of optical fiber, optical waveguide module and so on, in NIR wavelength range.

SUMMERY OF SPECIFICATION

Light guide Heat resistant light guide (outer diameter : 8mmφ for coaxial epi-illumination port of Synos' M-Scope series)
Spectral characteristic Peak wavelength:1150nm、range of illumination wavelength:1100nm - 1500nm range
AC voltage 100V
Input voltage AC100V-240V(50Hz-60Hz)
Compatible lamp LM-100-IR(12.0V/100W)
Lamp voltage DC10.7±0.2V(Max.)
Lamp lifetime (average) 1000 hours nominal
Installation ZRubber legs placed on flat surface
Weight approx. 3.2kg
Intensity control Manual control / external volume control / external analog control
External dimensions W120 x H110 x D257 mm

ADAPTATION OF OPTICS

  • Synos' optical measurement optics M-Scope series with coaxial epi-illumination port
    • Sophisticated Optical Measurement optics M-Scope type I
    • Simplified Optical Measurement optics M-Scope type J
    • Sophisticated Optical Beam NFP Measurement Optics M-Scope type S
    • NFP/FFP Simultaneous Measurement Optics M-Scope type D

ADAPTATION OF IMAGE SENSOR

  • InGaAs High Sensitivity NIR Detector ISA041H2
  • InGaAs High Sensitivity NIR Detector ISA041VH
  • InGaAs NIR Detector ISA041M

MANUFACTURER

  • MORITEX Corporation, Japan.

CATALOG DOWNLOAD