IMAGE SENSOR
FOR OPTICAL
MEASUREMENT
Various optical sensors best for optical measurement from visible to NIR wavelength range
Synos' unique optical measurement & inspection system in combination with optics, sensor, image processing and mechanics
LIGHT SOURCE
& ACCESSORY,
PERIPHERALS
Introduction of light source units and accessories, peripherals such as object lens, optics workbench etc.
APPLICATION
& TECHNICAL
INFORMATION
Application notes and technical information about Synos' optics and optical measurement systems
INTRODUCTION OF SYNERGY OPTOSYSTEMS CO., LTD.
SYNOS ~Synergy Optosystems~ independently develops various optical instruments and related products targeting on optical measurement and analysis. We have a wide lineup of products such as specially designed optics , imaging detectors, optical measurement instruments, light sources that can be applied to optical application measurement in various fields centered on optical communication, optical interconnection, optical devices, and optoelectronics. We have rich lineups of various optical measurement and analysis solutions such as high-performance laser beam profiler, various optical beam measurement and analysis systems, special-purpose optical measurement systems, and custom-made systems.
PRODUCT & TECHNOLOGY INFORMATION / NEWS & TOPICS
| NEW 2020/12/28 |
<RELEASE NEWS>High Resolution CMOS Detector ISA071 series products are released As the new detectors for optical beam profile measurement and analysis, we have released High Resolution CMOS Detector ISA071 and ISA071GL, with 1/1.8" CMOS sensor, 2048×1536 pixels (3.2M pixels), 3.45μm square cell pitch, 12bit gradation, USB 3.0 I/F. Suitable for laser beam profiler and various optical beam measurement in visible to 1100nm spectral range. |
ISA071 |
|---|---|---|
| NEW 2020/12/28 |
<END-OF-SALES ANNOUNCEMENT>High Resolution Digital CCD Detector ISA011 series High Resolution Digital CCD Detector ISA011 series products will be discontinued as of the end of December 2020 due to the end of production of CCD elements. The successor models will be High Resolution CMOS Detector ISA071 and High Resolution CMOS Detector For Laser Measurement ISA071GL. |
ISA071 |
| NEW 2020/7/1 |
<TECHNICAL INFORMATION>Catalog glossary page opened. We have opened catalog glossary page related to our products (optical system related, data processing analysis related, optical related general glossary). Please refer to "glossary" from APPLICATION page. |
Application |
| NEW 2020/7/1 |
<RELEASE NEWS>Two types of Photometric Module PMD002 series products are released For measuring light emission parameters of various light emitting elements, we have released two types of photometric module product. One is IVL Measurement Module PMD002/IVL, sensor module for measurement of IVL characteristics of various light emitting devices. The other is Polarization Measurement Module PMD002/POL, optical unit for measurement of Polarization and extinction ratio of various light emitting devices. Please refer PMD002/IVL, PMD002/POL for details. |
System Product |
| NEW 2020/7/1 |
<RELEASE NEWS>Wafer Level Optical Characteristic Measurement System For VCSEL (and light emitting devices) is released For wafer level measurement of light emission parameters of VCSELs and light emitting devices, we have released Wafer Level Optical Characteristic Measurement System For VCSEL. By combining with a manual prober or semi-auto prober, various emission parameters of VCSEL can be analyzed at the wafer level. Please refer Wafer Level Optical Characteristic Measurement System For VCSEL for details. |
System Product |
| 2019/4/1 | <RELEASE NEWS> Optical Beam Analysis Software Optometrics BA Standard Version 3.0.0 SYNOS' Optical Beam Analysis Software Optometrics BA Standard Version 3.0.0 is released. Due to functional changes of software accompanying this new version release, two types of licenses, Standard and Basic, have been prepared. Also, Socket Communication External Control Software AP013-ExC becomes option. For details, please refer to "AP013" from "SYSTEM" page. |
System Product |
| 2019/4/1 | <RELEASE NEWS> Wide Area Type FFP Measurement Optics M-Scope type FW and related system We have released "Wide Area Type FFP Measurement Optics M-Scope type FW that supports FFP measurement of a large luminous size element with a luminous flux diameter of φ3 mm. For details, please refer to "Optics" page. We also released "Wide Area FFP Measurement System" corresponding to this optics. For details, please refer to "System" page. |
Optics Product System product |
| 2019/4/1 | <RELEASE NEWS> 3 models of Optical Beam Profile Measurement Optics and related system for ~10W class high power laser Corresponding to the beam profile measurement of output ~ 10 W class high power laser whose demand is expanding in various application fields nowadays, We have released 3 models of optical beam profile measurement optics for high power laser, such as Sophisticated NFP Measurement Optics For High Power Laser M-Scope type HS, FFP Measurement Optics For High Power Laser M-Scope type HF, and NFP/FFP Simultaneous Measurement Optics For High Power Laser M-Scope type HD. For details, please refer to "Optics" page. We also released related system corresponding to these optics. For details, please refer to "System" page. |
Optics Product System product |
| General information | Measurement standardization progress, about EF/EAF measurement. | Refer to here |
SALES & MARKETING INFORMATION / NEWS&TOPICS
| NEW 2020/12/14 |
Exhibition Report "All about Photonics / InterOpto 2021, Tokyo, Japan" SYNOS exhibited at "All about Photonics / InterOpto2021 (Tokyo Big Sight, Tokyo, Japan), scheduled for Desember. 9-11, 2020. Thank you for your time coming over to our booth, and thank you for your continued support. |
Sales Information |
|---|---|---|
| 2020/11/4 | Exhibition Report "FOE 2020, Chiba, Japan" SYNOS exhibited at "FOE2020 (Makuhari Messe, Chiba, Japan), scheduled for October. 28-30, 2020. Thank you for your time coming over to our booth, and thank you for your continued support. |
Sales Information |
| 2020/3/23 | Notice of exhibition cancellation "OPIE'20 (Yokohama, Japan)" The OPIE'20 exhibition, which was scheduled to be exhibited, has been officially canceled due to the decision of the exhibition organizer (Optronics Co., Ltd.), due to concerns about the effects of the new coronavirus. |
Sales Information |
| 2020/3/9 | Information about canceling exhibitions "OFC2020 (San Diego, USA)" We were planning to exhibit at OFC2020 (San Diego Convention Center, USA, March 10-12, 2020), but we will cancel the exhibit at this time due to concerns about the effects of the new coronavirus. |
Sales Information |
| 2020/2/3 | Exhibition Report "InterOpto 2020, Tokyo, Japan" SYNOS exhibited at "InterOpto2020 (Tokyo Big Sight, Tokyo, Japan), scheduled for January. 29-31, 2020. Thank you for your time coming over to our booth, and thank you for your continued support. |
Sales Information |
| 2019/12/9 | Exhibition Report "The 19th Photonix, Chiba, Japan" SYNOS exhibited at "The 19th Photonix (Makuhari Messe, Chiba, Japan), scheduled for December. 4-6, 2019. Thank you for your time coming over to our booth, and thank you for your continued support. |
Sales Information |
| 2019/9/30 | Exhibition Report "Taiwan Innotech Expo 2019, Taipei, Taiwan" SYNOS exhibited at "Taiwan Innotech Expo 2019 (Taipei World Trade Center, Taipei, Taiwan), scheduled for September. 26-28, 2019. Thank you for your time coming over to our booth, and thank you for your continued support. |
Sales Information |
| PARTNERSHIP FOR SALES ABROAD |
Synos has selected Daitron Inc. (USA) for the distribution of our products throughout North America. In 2016 Synergy Optosystems Co., Ltd. began cooperation with Daitron Incorporated Inc. (9720 SW Hillman Court, Suite 805 Wilsonville, Oregon 97070, USA) regarding sales and sales promotion of our products in North America. Our goal is to acquire new markets and customers through this mutual cooperation including sales promotion and support in the North American market and exhibitions. About this partnership in details, please refer to "Sales Information". |
Sales Information |
CORPORATE INFORMATION / NEWS & TOPICS
| NEW 2018/7/9 |
PRODUCT DEVELOPMENT BY PUBLIC SUBSIDY PROJECT Development of Beam Profile Measurement and Evaluation System for High Power Laser Module is adopted as public support subject of "Subsidy for New Industry Creation by Hamamatsu city". Due to market expansion in the field of sensing for ADAS, illumination, display devices, laser processing, medical application, etc., further reliability and quality are required for high power laser modules. In such a situation, establishing the method of high precision beam profile measurement for high power laser module is essential. Receiving this adoption, Synos promotes system development, validation, implementation toward realization of "Beam Profile Measurement and Evaluation System for High Power Laser Module". |
|
|---|---|---|
| NEW 2018/2/13 |
PRODUCT DEVELOPMENT BY PUBLIC SUBSIDY PROJECT Development of Wafer Level Si-photonics Waveguide Evaluation and Testing System is adopted as public support subject of "New Technology Development Subsidy by Ichimura Foundation for New Technology". Receiving this adoption, Synos promotes system development, validation, implementation toward realization of "Wafer Level Si-photonics Waveguide Evaluation and Testing System". Furthermore, through this development, in cooperation with Dr. Okihiro Sugihara and Dr. Hidehiko Yoda of Utsunomiya University, Synos proceeds with verification and evaluation of the method and system structure. |
|
| <NOTICE!> 2017/10/2 |
<Notification of transfer of headquarters> I would like to notify you that our head office was moved to the address below as of October 1st, 2017. (New Address) 3625-1 Yuto-cho Yamazaki, Nishi-ku, Hamamatsu city, 431-1207, Japan (Phone) +81-53-523-8453 (Fax) +81-53-523-8459 |