光計測用光学機器と光計測システムのシナジーオプトシステムズ

PRODUCT OVERVIEW
NFP/FFP SIMULTANEOUS MEASUREMENT SYSTEM FOR BLUE HIGH POWER LASER

NFP/FFP Simultaneous Measurement System For Blue High Power Laser enables NFP and FFP measurement of ~10W class blue high power laser to be performed with a single optical system.

As the measurement optics, Synos' NFP/FFP Simultaneous Measurement Optics For Blue High Power Laser M-Scope type HD is used. Two-stage beam sampler unit (light reduction unit) is installed after the objective lens. NFP measurement port and FFP measurement port are attached to this optical system. The luminous flux incident on the optical system is branched to both measurement ports and relayed to the detector. This enables simultaneous NFP and FFP measurements using a single optical system.

In combination with M-Scope type HD, detector and Optical Beam Analysis Module AP013, it will be possible to easily build NFP/FFP simultaneous measurement system for blue high power laser devices.

FEATURE

  • Optics selection : Synos’ NFP/FFP Simultaneous Measurement Optics for Blue High Power Laser M-Scope type HD
    • NFP and FFP measurement of ~10W output class high power blue laser can be measured simultaneously by a single optical system.
    • A two-stage beam sampler unit (light reduction unit) is installed after the objective lens, and attenuates the amount of light suitable for measuring high power lasers
  • Coaxial epi-illumination system(option) can be attached. Enables microscopic image observation with coaxial epi-illumination. Easy focus adjustment.
  • The measurable wavelength range corresponds to 400-460nm range.
  • Image processing and data analysis : Synos' Optical Beam Analysis Module AP013
    • All-in-one package system of PC for data processing, Optical Beam Analysis Software Optometrics BA Standard(or Basic), sensor driver software, calibration data set for data analysis. Possible to start up measurement system quickly after system introduction.
    • Optometrics BA Standard, specially designed high-functional software for optical beam profile analysis
      • Essential and useful functionality for NFP, FFP, beam profile analysis are equipped in Optometrics BA Standard.
      • Furthermore, power distribution analysis function including EF/EAF analysis, D86, 4σ analysis function is installed in Optometrics BA Standard (Power distribution analysis function are not included in Optometrics BA Basic).

APPLICATION

  • Measurement and analysis of NFP/beam profile and FFP/radiation angle distribution of high power blue lasers and blue laser modules

SYSTEM COMPONENT SELECTION

SYSTEM COMPONENT SELECTION

MAIN COMPONENT

OPTION

  • Objective lens selection
    • M-Plan Apo NUV 50x (Fixed magnification when simultaneously measuring NFP and FFP)
    • M-Plan Apo NUV series (Available only when measuring NFP)
  • Neutral density filter (standard 25mmφ)
    • for M-Scope  type HD : NDF VIS-5 (10%, 5%, 1%, 0.1%, 0.01%)
  • Coaxial epi-illumination unit
    • About coaxial epi-illumination unit, please refer to here.
  • Optics base and workbench
    • Optics base unit for optical fiber measurement
    • Vertical workbench for optics
    • About optics base and workbench, please refer to here.

RELATED PRODUCT INFORMATION

  • For other measurement system lineup, please refer to here.

TECHNICAL INFORMATION

CATALOG DOWNLOAD